New
20oz Pneumatic Cartridge Gun Applicator |
Cartridge gun dispensers are designed for the controlled
application of pastes, gels, adhesives and fluids. We offer our
customers the most cost effective cartridge gun dispensing systems. |
|
|
|
The original G110-20 pneumatic
20oz applicator gun (right) had been made obsolete by the
manufacturer. We are near to completion of the replacement product.
The AD110-20 gun shown above, will be fully compatible with all 20oz
Techcon and Semco PPG cartridges, Techkits and Semkits.
This new product can be
pre-ordered below. We expect to ship our first batch of new guns in
around 4 weeks.
|
|
A high quality pneumatic
cartridge gun with metal threaded retainer and pistol grip. 20oz size (591cc approx). Suited to controlled lines or
potting of most adhesives, fluids, sealants, RTV, solder paste, grease, gels, long cure or
single part epoxies, mastics and potting compounds.
Connect to an
air line with regulated air supply.
Airlines are available to order separately. Unscrew the
metal retainer body from the handle
on the gun (threaded fitting). Load in a filled 20oz
(591cc) plastic dispensing cartridge. Attach a threaded nozzle
or use a male luer lock adapter for attachment of any standard
needle tips. Press trigger for flow.
Release of trigger stops material oozing. This gun includes
(1) gun, (1) cartridge, (1)
plunger, (1)
flange cap, (1)
tip cap, (1)
nozzle, (1)
tip adapter and (1)
tip.
Cartridges are inserted into the cartridge gun threaded
metal retainer. This ensures the cartridge does not move
under constant use of air pressure. All products are industrial grade and are covered
by our no-quibble One Year warranty.
The guns are robust and handle
most liquids and pastes dispensed from them. The AD110-20
features an adjustable regulator knob to set the best flow rate for the
material being used and a hook ring if used with a counter balance support.
General Use: Guns are
light and
can be used in a factory production or assembly department
as well as for repair and re-work. Guns are commonly used
for sealant repair or maintenance applications.
Common
Applications: Deposits of solder paste, solder flux,
grease to bearings, PVA glue to
furniture joints, RTV to seal seams, silicone dots to bond
products, gasket sealant repair, shots of roach
insecticides, general adhesive applications, mixed Semkit
and Techckit cartridges. AD series applicator guns have
a Commodity Tariff Code of 82055980. Plastic components have a
Commodity Tariff Code of 39269097.
Adhesive Dispensing Ltd
provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents,
primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
|
|
|
AD Series
Pneumatic Applicators |
|
Air-powered cartridge gun with metal threaded cartridge
retainer. Large volume applicators designed
to suit different viscosity materials. With ergonomic
handle and trigger assembly. Quiet operation and
lightweight over long periods of use. |
|
|
|
|
Industrial grade cartridges and
plungers for controlled dispensing of sealants,
adhesives, glues, silicones, solvents, pastes and resins. All
cartridges feature a 1/4 Inch nozzle thread. Cartridges are
safe for use to 100 psi pressure and are certified silicone free
plastics.
Read more... |
|
|
|
|
|
|
|
|
|
|
Reusable flange end caps and threaded
tip caps for sealing both ends of the cartridge air
tight once materials have been transferred into them. Supplied
in sealed packs with labels and batch codes. Cartridge caps are
certified silicone free plastics.
Read more... |
|
|
|
|
Cartridge Plastic Nozzles |
|
Industrial dispensing nozzles
with 1/4 Inch thread for leak free
attachment to cartridges and dispensing valves. Supplied in
sealed packs with labels and batch codes. Cartridge nozzles are
safe to 100 PSI and are certified silicone free plastics.
Read more... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial dispensing nozzles
with 1/4 Inch thread for leak free
attachment to cartridges and dispensing valves. Supplied in
sealed packs with labels and batch codes. Cartridge metal
nozzles are safe to 100 PSI and are certified silicone free
materials. Read
more... |
|
|
|
|
|
Cartridge to Luer Lock Tips |
|
Industrial precision luer lock tips
work
with the 1/4 Inch thread to luer adapter
fitting. Supplied in sealed packs with labels and batch
codes. Fittings and precision tips are safe to 100 PSI and are
certified silicone free materials.
Read more... |
|
|
|
|
|
The guns are robust and handle most liquids
and pastes dispensed from them. The handle cap uses a hard
wearing rubber gasket seal for the retainer that can be replaced
after very long periods of use. Gaskets held in stock.
Items are shipped by a courier tracked and insured for all items
that are available from stock. Items on a lead time will be
shipped as soon as they are made available. |
|
Related Dispensing Products |
|
|
|
|
|
Cartridges Plungers |
Plastic Nozzles |
Techkit Cartridges |
Syringes Consumables |
Luer
Lock Dispensing Tips |
|
|