Micro precision spray valves
apply low to medium viscosity liquids without excessive mess or waste. Using low pressure
and low volume, they can be adjusted from a jet to a fine mist. Used
with the TS500R digital valve controller for fully automated or
manual operator controlled
TS5540-MS spray valve is designed to spray low to medium viscosity
fluids through our disposable dispensing needle tips.
innovative design enables the valve to produce uniform spray
patterns ranging from 0.180 Inch to 0.60 Inch (4.6mm to 15.0mm) in
diameter. The TS5540-MS spray valve has a field replaceable UHMWPE
seat (seal) to provide positive shut-off and extend the valve life
The smooth fluid path reduces turbulent flow and
reduces air entrapment to ensure precise and repeatable spray
patterns. The stainless steel fluid housing and air cylinder make
the valve compatible with a wide range of aggressive and non
aggressive spray fluids.
The compact design and the threaded
mounting hole allow the valve to be easily integrated into most
GBP each ex. Vat. Excludes
Lead Time: Usually Ships 2-3
Summary: The TS5540-MS
spray valve is designed to spray low to medium viscosity fluids
through disposable dispensing tips. This innovative design
enables the valve to produce uniform spray patterns ranging from
0.180 Inch to 0.60 Inch (4.6mm to 15.0mm) in diameter. With a
field replaceable UHMWPE seat
Wetted Parts: Stainless Steel, Teflon
Body Material: Type 303 Stainless Steel
Valve Body Colour: Silver Size:
119mm L x 28.5mm Diameter Valve Weight: 331 Gram
Nozzle: Disposable Needle Tips Fluid Viscosity Range: 1 to
CPS Repeatability: +/- 0.56% Cycle Rate: Up to 600 cycles/ minute
Flow Rate: 1680ml/ minute (water) @ 100 psi Spray Pattern Widths: 4.6mm
Maximum Fluid Pressure: 100 psi Activation Air Pressure: Minimum 70psi Material Inlet
Thread Size: 1/8" NPT Material Outlet Thread Size: Spray Nozzle Mounting Hole Thread Size: 1/4-20UNC-2B
Fluid Flow Path: Straight Warranty: 1 Year
TS500R Digital Valve Controller
GBP each ex. Vat. Excludes
Lead Time: Usually Ships 72
Summary: Universal digital
valve controller with foot pedal control or remote I/O
connection. Make rapid dots or beads using the timer. Memory
storage function. Low pressure alarm. Works with all
dispensing valves. Learn more...
Type: Electro Pneumatic Timed Dispenser
Initiate: Electric Foot Switch or I/O Port Air Pressure Display: Digital
Gauge Timer Display: Digital LCD Timer: 0.008 to 60 seconds Dispense Modes: Timed or Continuous Output Air Pressure: Up to 100 psi Input Air Pressure: 254 x 191 x 102 mm
Weight: 2.6kg (5.8lb)
Input Voltage: 110V - 220V AC Cycle Rate: Up to 600 cycles/ minute
Timer Tolerances: +/- 0.001% Meets or Exceeds: CE, TUV-GS, NRTL Warranty: 1 Year
TS2220 Pressure Pot 2 Litre
GBP each ex. Vat. Excludes carriage.
Lead Time: Ships 24 Hours
Summary: Premium tank unit
with lid, adjustable air pressure gauge, stainless steel tube
fitting, 1/4" OD flexible tube kit, user guide. CE approved.
Use with TS5600 series valves. Learn
Wetted Parts: Polyethylene Outer
Size: 128mm W x 185mm H Inner Chamber Size: 120mm W x 177mm H Fluid
Viscosity Range: Use up to 30,000
CPS Weight: 4.5kg Maximum Air Pressure: 75 psi Air Inlet Connection: 1/4" NPT Thread Material Outlet Connection:
1/4" OD Tubing
Materials: Stainless Steel/ Aluminium
Meets or Exceeds: CE Warranty: 1 Year
Spray Valve Spares
Lead Time: Ships in 72
A range of spares for use with TS5540
spray valves. Repair kits and other fittings.
Luer lock fluid lines in PE material.
Designed to feed liquids, adhesives and fluids under pressure to 100 PSI.
Use with valves and pressure pots. Quick
twist-on/ twist-off connection. 2.54mm ID. Clear and black
tubes are available from stock. Sealed packs of (10).
Learn more ...
shipped by courier on a tracked and
insured service for stock items. Products on a
lead time or built to order will be sent as soon as available. Customers are informed of
Spray deposits of oils, inks, lubricants, conformal coatings, solvents,
primers and more.
2017 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.