Adhesive Dispensing

 

Home > Components > 400 series Pistons About Us - Contact Us - Site Map - Help
     
Company Dispensers Valves Tips Barrels Robots Packaging SolutionsContactAssist

You currently have items in your basket. (Total=)

Components

  Dispense Tips
  Barrels
  Barrel Caps
  Barrel Adapters
  Dispensing Bottles

Dispensers

  Hand Plungers
  Syringe Guns
  Syringe Dispensers

Accessories

  Syringe Filling Systems
  Bench Stands
  Syringe Racks

Packaging

  Filled Barrels
  Filled Cartridges
  Filled Techkits
  Filled Twin Cartridges

Adhesives

  Cyanoacrylates
  Anaerobics
  UV Cure
 
 
Protected by Copyscape 
 

 
 
Back to top
400 Series Industrial
Syringe Barrel Pistons
Manual syringe assembly adhesive dispensing rubber piston for syringe barrel adhesive dispensing

400 series syringe barrels and pistons are cost effective components available in sizes from 1cc to 60cc. Use type with air-powered dispensers or other version with a manual hand-held syringe assembly. If using with an air-powered dispenser, a 400 series adapter is required and it is best to select using plastic pistons. If using manually, select manual rubber pistons and a plastic push rod.

400 series pistons are available for use with 400 series syringes as manual hand syringe assemblies or for air powered syringe dispensers.  Manual pistons are in sizes from 1cc to 60cc. They attach to the plastic plunger rod for use with syringe barrels. Rubber pistons for manual assemblies are supplied either pre-lubricated with a medical grade synthetic silicone oil to ease insertion or non-lubricated without any oil. (-LUB indicates lubricated versions). Please select non-lube pistons if using an adhesive that could be affected by the silicone oil.

All pistons are suitable for use with most watery liquids to thick pastes. Air powered pistons are available in sizes 1cc to 60cc for use with 400 series syringe barrels. Dual blades prevent fluid drips and allows slight reverse action after dispensing to release pressure on fluids.  Available in neoprene rubber or polyethylene plastic. All supplied in sealed packs.

Copyright © 2008 Adhesive Dispensing Ltd. All rights reserved.

  Manual Syringe Pistons
Use with manual plunger rods.

Use with syringe barrels and manual plunger rods to make a complete syringe assembly. These rubber or plastic pistons clip onto the rod. Supplied coated with a medical grade silicone lubricant or without any lubricant (rubber only). Supplied in sealed packs direct from stock.

Size Part Code Type Material Pack Price Add
1cc 401L-2 Non-Lube Rubber 50 GBP   per pack
1cc 401L-2-LUB Lubricated Rubber 50 GBP   per pack
3cc 403L-2 Non-Lube Rubber 50 GBP   per pack
3cc 403L-2-LUB Lubricated Rubber 50 GBP   per pack
3cc 403L-7 Non-Lube Plastic 50 GBP   per pack
6cc 406L-2 Non-Lube Rubber 50 GBP   per pack
6cc 406L-2-LUB Lubricated Rubber 50 GBP   per pack
6cc 406L-7 Non-Lube Plastic 50 GBP   per pack
10cc 410L-2 Non-Lube Rubber 50 GBP   per pack
10cc 410L-2-LUB Lubricated Rubber 50 GBP   per pack
10cc 410L-7 Non-Lube Plastic 50 GBP   per pack
35cc 435L-2 Non-Lube Rubber 50 GBP   per pack
35cc 435L-2-LUB Lubricated Rubber 50 GBP   per pack
35cc 435L-7 Non-Lube Plastic 50 GBP   per pack
60cc 460L-2 Non-Lube Rubber 50 GBP   per pack
60cc 460L-2-LUB Lubricated Rubber 50 GBP   per pack
 

  Air Powered Syringe Pistons
Use with adapter assembly air hose.

Use with syringe barrels and air-powered dispensing machines. These rubber or plastic pistons are designed deeper so they do not twist under pressure. Supplied coated with a medical grade silicone lubricant or without any lubricant (rubber only). Supplied in sealed packs direct from stock.

Size Part Code Type Material Pack Price Add
1cc 401L-2 Non-Lube Rubber 50 GBP   per pack
1cc 401L-2-LUB Lubricated Rubber 50 GBP   per pack
3cc 403L-2 Non-Lube Rubber 50 GBP   per pack
3cc 403L-2-LUB Non-Lube Rubber 50 GBP   per pack
3cc 403L-9 Non-Lube Plastic 50 GBP   per pack
6cc 406L-8 Non-Lube Rubber 50 GBP   per pack
6cc 406L-8-LUB Lubricated Rubber 50 GBP   per pack
6cc 406L-9 Non-Lube Plastic 50 GBP   per pack
10cc 410L-8 Non-Lube Rubber 50 GBP   per pack
10cc 410L-8-LUB Lubricated Rubber 50 GBP   per pack
10cc 410L-9 Non-Lube Plastic 50 GBP   per pack
35cc 435L-8 Non-Lube Rubber 50 GBP   per pack
35cc 435L-8-LUB Lubricated Rubber 50 GBP   per pack
35cc 435L-9 Non-Lube Plastic 50 GBP   per pack
60cc 460L-9 Non-Lube Plastic 50 GBP   per pack
 

400 Series Products

    Use manually or on air-powered dispensers
  Industrial grade safe to 100 psi
  Resistant to aggressive fluids and liquids
  Wide range of size options
  Supplied in sealed packaging
 

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

 
  Adhesive dispensers   Metering valves   Syringe barrels   Dispensing tips   Cartridge reservoirs
  Dispensers & Valve Controllers   Fluid Dispensing
Valves
  Consumables
Syringes
  Dispensing Needle
Tips
  Cartridges & Dual Cartridges
 

Air-Powered Dispensers * Industrial Dispensing Components * Precision Valve Systems * Bench Robots

Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles

|  Privacy   |   Terms   |  Accounts  |

All orders Prices are in UK pounds. Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping. Products are covered by a 12-month warranty against faults and malfunction. All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us.

Our new web shop is available to order these products in a number of different currencies. Please visit www.adhesivedispensing.co.uk for more details. 

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.

 

Copyright  2005 - 2017 Adhesive Dispensing Ltd. All rights reserved.

   
   
         
   
  Support
   
  Literature
  Dispense Tips Brochure
  Syringe Barrels Brochure
  Cartridges Brochure
  Nozzles Brochure
  Robots Brochure
  Full Catalogue
 
  Information
  Important Safety Information
  Viscosities Chart
  ISO9001:2008 Certificate
 
  Contact Us
  Equipment Recommendations
  Request a Quote
  Technical Support
  Applicator Assist
 
  Shipment of this product
 

Products are shipped globally from our UK warehouses using a courier tracked & insured courier service. We use all the main carriers. High value items are insured. We provide a POD and tracking code for customer orders.

 
 
  Using these products
 

400 series syringe pistons are designed for manually with an adapter and plunger rod. They are thick walled with wide flanges and so designed for high pressures. Use these pistons with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVA, inks and gels.

 
 
  Industrial Grade Safe
 

All parts are safe for use up to 100 psi pressure.

 
 
 
  Tips we hold in stock 
 

14 gauge crimped dispensing tip luer lock 1/2"
Crimped Hub

14 gauge precision bend dispensing tip
Precision Bend


TS14-1/2MPK aluminium dispensing tip techcon
Aluminum Hub


All Metal Stainless

 
Teflon Lined

brush dispenser tips adhesive dispensing
Brush tips