Adhesive Dispensing

UK Freephone.    0800 094 9058
Lo-Call Tel.  +44 (0) 845 652 0058
Lo-Call Fax. +44 (0) 845 652 0059
Switchboard. +44 (0) 1908
686660

 

Home > Dispensing Solutions > Filled HingePacks About Us - Contact Us - Site Map - Help
     
Company Dispensers Valves Tips Barrels Robots Packaging SolutionsContactAssist

You currently have items in your basket. (Total=)


Packaging

  Filled Barrels
  Filled Cartridges
  Filled Techkits
  Filled Twin Cartridges

Components

  Dispense Tips
  Barrels
  Pistons
  Barrel Caps
  Barrel Adapters
  Dispensing Bottles
  Dispensing Pens

Dispensers

  Hand Plungers
  Syringe Guns
  Syringe Dispensers

Accessories

  Syringe Filling Systems
  Bench Stands
  Syringe Racks

Adhesives

  Cyanoacrylates
  Anaerobics
  UV Cure



Back to top


Custom Filled HingePack Mix Bags

Save on production time spent mixing and weighing two-component epoxies and silicones. The HingePack system offers a cost effective way to receive and mix any two part fluids at any mix ratio. The materials are shipped in a sealed bag ready for mixing.

 


Hinge packs are a flexible packet that holds pre-measured volumes of unmixed base material and catalyst to any ratio that you require in pack sizes up 250 grams. We supply them filled with your specified material. Either material that you buy and supply to us free-issue or where we supply the raw material packaged in a sealed hingepack.

Hinge packs are easy to use and safe.  We guarantee your exact mix because the ratios are pre-set to your requirements and so weighing then mixing two-component materials is not required.  Ideal for use with such fluids as epoxies, acrylics, silicones, polysulphides, urethanes, conductive and other two-part fluids.

The two parts of the material are kept separate by a plastic divider.  The ends are simply pulled to remove the divider which is then used to mix the two parts.  Once mixed, the corner is snipped and the material can be squeezed direct to your components (ideal for potting) or squeezed into a disposable syringe for gun or machine dispensing. Please contact us for sizes and options.


Hold each end and pull firmly to remove plastic divider Mix thoroughly on table top or any 90 degree surface until well mixed Cut corner and dispense or pour into any syringe barrel on a dispenser

 

 

     

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.


Air-Powered Dispensers * Industrial Dispensing Components * Precision Dispense Valve Systems * XYZ Bench Robots

Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles


|  Privacy   |   Terms   |  Accounts  |

Prices are in £ Sterling GBP and exclude VAT which is charged on UK orders at checkout. Orders are encrypted on a 128 bit secure server for total security. All personal information and payment details is encrypted on SSL secure website pages. Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.

Copyright © 2013 Adhesive Dispensing Ltd. All rights reserved.
  128bit SSL Servers  
   
   
  Support
   
  Literature
 
  Syringe Barrels Brochure
  Cartridges Brochure
  Nozzles Brochure
  Dispense Tips Brochure
  Part Numbers List
 
  Information
 
  Packaging Comparison Chart
  Packaging Advice
  Important Safety Information
   
  Contact Us
 
  Equipment Recommendations
  Request a Quote
  Technical Support
  Applicator Assist