Adhesive Dispensing Accessories

Adhesive Dispensing

You currently have items in your basket. (Total=)

> Home > Accessories

Fluid Dispensing Accessories

Our accessories improve fluid dispensing applications and are essential tools for a safer and cleaner workplace. Use these products with our syringe dispensers, dispense valves and XYZ benchtop robots.

Parts to use with dispensing machines, compressors, storage, etc.

Filtration of compressed air is essential for pneumatic dispensing machines. Oil, moisture or contaminents can damage the sensitive circuits inside.

Manifolds allow air or fluid to be diverted from a single pressure pot or cartridge to multiple outlets.

Pickup tools allow components to be placed without contamination.

Syringe barrel stands hold filled parts on the work bench without mess.

Syringe racks hold multiple filled barrels in an upright position.

Bench stands hold syringe barrels, cartridges & valves above the bench for hands free dispensing.

Finger switches are used with pneumatic dispensers instead of the foot switch. Allow the operator to dispense whilst standing up.

Air Filter Regulators

Syringe Air filters and regulators for ensuring a clean and controlled air supply to dispensers, pressure pots, cartridges and metering valves. 5 micron filters will remove particles and moisture. We recommend the use of filters when dispensing moisture sensitive adhesives such as cyanoacrylates. Read more...

Liquid and Air Manifolds

Liquid or air manifolds for use with fluid lines, feed tubing, etc. Allows for liquid flows or air pressure to be split from pressure pots, cartridges or barrels to multiple outlets. For use when multiple dispensing valves or syringe barrels are used. Also can be used for splitting air flow from dispenser to multiple syringe barrels. Read more...

Pickup Tools

Hand held pickup tools for handling most small components and electronic chips. ESD safe. Options for manual hand held low cost tools to pneumatic hand held with adjustable vacuum control. Suitable for use on any workbench. Simple devices used in assembly and test applications. Read more...

Syringe Barrel Stands

Bench mounted stands and holders for all sizes of syringe barrel. Allows for barrels to be mounted upright to eliminate mess and spills. Filled syringe barrels can fall over on the bench and these parts eliminate the problem. For syringe sizes 3cc through to 60cc. Low cost accessories to assist with dispensing applications. Read more...

Syringe Barrel Racks

Bench mounted storage racks allow batches of filled syringe barrels to be conveniently held upright after filling. For all sizes of syringe barrel from 3cc to 60cc. Read more...

Bench Stands

Bench mounted stands to hold syringe barrels, cartridges and dispensing valves for hands free application of materials. Available as complete systems or individual parts. Read more...

Dispensing Finger Switches

Electronic finger switch buttons for use with timed dispensers. Alternative to foot switch. Attaches to all size syringe barrel. Ideal for operating a pneumatic dispenser if standing up at the work bench. Read more...

Liquid Filling Funnels

Plastic funnels to assist transfer of pourable liquids from drums or bottles into syringe barrels or cartridges. Natural clear plastic with a 95mm diameter top. Easy to clean and low cost. Supplied in a sealed pack of 5. Read more...


	Dispensers & Valve Controllers			Consumables Syringes		Dispensing Tips


	Cartridges & Plungers			Dispensing Nozzles		Techkit Cartridges

	Literature

	Full Catalogue
	Syringe Barrels
	Cartridges & Nozzles
	Dispense Tips
	Nozzles Brochure
	Dispense Guns
	Dual Air Guns
	Dual Cartridge & Mixers

	Syringe Barrels	Syringe Pistons
	Syringe Guns	Cartridge Guns
	Air Dispensers	Dispensing Equipment
	Mini Robots	Small Robots
	Medium Robots	Large Robots
	Extra Large Robots	Fume Extraction
	Bench Stands	Syringe Racks
	Compressors	Cartridge Retainers
	Cyanoacrylates	Anaerobics

	Dispense Tips	Tip Caps
	RTV Valves	Cyanoacrylate Valves
	Anaerobic Valves	UV Cure Valves
	Grease Valves	Solder Paste Valves
	Spray Valves	Valve Controllers
	Pressure Pots	Syringe Filling Systems
	Cartridges	Nozzles
	Bottles	Techkits
	Dual Cartridges	Mixer Nozzles

COMPANY INFORMATION	SUPPORT	CUSTOMER SERVICE
About Us	Solutions	Carriage
Shipping & Returns	FAQ's	Terms & Conditions
Privacy	Site Map	Help
Contact Us	Assist	Accounts

Techcon

Prices are in UK pounds. Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping. Products are covered by a 12-month warranty against faults and malfunction. All orders online are encrypted for safety and security. Please read our privacy agreement for details. We also process phone or fax payments by credit and debit card. Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.