The TS5600 series
general purpose diaphragm valves are ideal for making controlled
deposits of most low to medium viscosity liquids. The wetted parts
are made from Delrin for low maintenance handling of adhesives such as
UV Cure.
The
TS5600 Series dispense valves accurately control the application of
most low to medium viscosity fluids without drips. The unique
seal-less design incorporates an inert polymer diaphragm that
isolates the actuator from the valve.
The adjustable
open/close stroke 0.13mm to 0.64mm (0.005" to 0.025") allows for a
very fast response with positive shutoff. Wetted components are made
of inert plastics.
Takes a direct feed from any
pressure pot,
cartridge or syringe and includes a selection of flexible fluid line
tubing and connectors.
Valve open time can be as short as 15
milliseconds. Model TS5622VD with Teflon wetted parts is
used for dispensing solvents, UV Cure, anaerobics and fluxes.
Simple to use with TS500R,
TS250,
TS350 digital timed controllers.
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids -
from watery liquids, solvents, primers and activators through to
thick pastes, sealants, silicones, gels and epoxies.
TS5622VD Delrin Air Valve
GBP each ex. Vat. Excludes
Carriage.
Lead Time: Usually Ships 24
Hours
Summary: Diaphragm valve
with vertical design. Adhesive or liquid is fed under pressure
to the side of the fluid housing, the diaphragm opens to allow
flow to the tip from the bottom. Adjustable stroke control for
fine tuning. Teflon head and diaphragm. Make rapid dots or
controlled beads. For UV Cure, primers, solvents, inks,
oils, anaerobics. Comes with airline hose and fittings
kit.
Read more...
Item
Qty
Price
GBP
Add
TS5622VD
1
each
TS5622VD Specifications
Wetted Parts: Delron Fluid Housing
Head Colour: Black Size:
76mm L x 27mm Diameter Valve Weight: 118 Gram Fluid Viscosity Range: 1 to
50,000
CPS Repeatability: +/- 0.30% Cycle Rate: Up to 500 cycles/ minute
Flow Rate: 3432ml/Min (water) @ 100 psi Minimum Shot Size: 0.0075cc/ ml
Maximum Fluid Pressure: 100 psi Activation Air Pressure: Minimum 70psi Material Inlet
Thread Size: 1/8" NPT Material Outlet Thread Size:
1/4-28" UNF Mounting Hole
Thread Size: 10-32" UNF
Body Material: Aluminium
Valve Body Colour: Black Fluid Flow Path: 90 Degrees Warranty: 1 Year
TS250 Digital Valve Controller
GBP each ex. Vat. Excludes
Carriage.
Lead Time: Ships
24 Hours
Summary: This air-powered
dispenser has 0-100 PSI air output for controlling TS1212 valve. It is dual voltage so can be used globally. We ship this
with accessories ready to use out of the box.
Learn more...
Item
Qty
Price
GBP
Add
TS250
1
each
TS250 Specifications
Type: Electro Pneumatic Timed Dispenser
Initiate: Electric Foot Switch or I/O Port Air Pressure Display: Analogue
Gauge Timer Display: Digital LCD Timer: 0.02 to 60 seconds Dispense Modes: Timed or Continuous Output Air Pressure: Up to 100 psi Input Air Pressure: 152 x 165 x 178 mm
Weight: 1.2kg (2.6lb)
Input Voltage: 110V - 220V AC Cycle Rate: Up to 600 cycles/ minute
Timer Tolerances: +/- 0.001% Meets or Exceeds: CE, TUV-GS, NRTL Warranty: 1 Year
Pressure Pot 500 Gram
GBP each ex. Vat. Excludes carriage.
Lead Time: Ships 24 Hours
Summary: Premium tank unit
with lid, adjustable air pressure gauge, stainless steel tube
fitting, 1/4" OD flexible tube kit, user guide. CE approved.
Use with TS5600 series valves. Learn
more...
Product Code
Qty
Price
GBP
Add
TS1215
1
each
TS1215 Specifications
Wetted Parts: Polyethylene Outer
Size: 115mm W x 180mm H Inner Chamber Size: 102mm W x 152mm H Fluid
Viscosity Range: Use up to 20,000
CPS Weight: 1.5kg Maximum Air Pressure: 60 psi Air Inlet Connection: 1/8" NPT Thread Material Outlet Connection:
1/4" OD Tubing
Materials: Aluminium
Meets or Excees: CE Warranty: 1 Year
Pressure Pot 2 Litre
GBP each ex. Vat. Excludes carriage.
Lead Time: Ships 24 Hours
Summary: Premium tank unit
with lid, adjustable air pressure gauge, stainless steel tube
fitting, 1/4" OD flexible tube kit, user guide. CE approved.
Use with TS5600 series valves. Learn
more...
Product Code
Qty
Price
GBP
Add
TS2220
1
each
TS2220 Specifications
Wetted Parts: Polyethylene Outer
Size: 128mm W x 185mm H Inner Chamber Size: 120mm W x 177mm H Fluid
Viscosity Range: Use up to 30,000
CPS Weight: 4.5kg Maximum Air Pressure: 75 psi Air Inlet Connection: 1/4" NPT Thread Material Outlet Connection:
1/4" OD Tubing
Materials: Stainless Steel/ Aluminium
Meets or Excees: CE Warranty: 1 Year
Diaphragm Valve Spares
Lead Time: Ships in 72
Hours
Full range of spares for use with air
operated diaphragm valves. Replacement fluid housing heads,
diaphragm discs, tip adapter fittings and fluid input
fittings.
Luer lock fluid lines in PE material.
Designed to feed liquids, adhesives and fluids under pressure to 100 PSI.
Use with valves and pressure pots. Quick
twist-on/ twist-off connection. 2.54mm ID. Clear and black
tubes are available from stock. Price is for sealed packs of (10).
Learn more ...
Delivery: Products
shipped by courier on a tracked and
insured service for stock items. Products on a
longer
lead time or built to order will be sent as soon as available. Customers are informed of
ship dates.
Typical Applications:-
Deposits of UV cure glues, Cyanoacrylate adhesives, solvents, primers,
inks, oils, flowable liquids, threadlock adhesives & many others.
Copyright
2017 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
Prices are
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
us.
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.
