The TS2220 Pressure Pot (pressure up to 75 psi) is designed to accommodate all solvents and adhesives, as well as cyanoacrylates and UV cure. It will accommodate clear, black and stainless steel fittings and feed tubing in 1/4, 3/8 and 6 mm OD, with stainless steel compression path fitting for a continuous fluid path from the reservoir inside the pot to the point of use. Feed tube is pushed through the tank lid fitting to reach the inside bottom chamber. The fitting is then tightened to ensure a direct liquid flow without leaks. Airtight seals ensure no leakage or air entrapment problems. The 75 psi operating pressure version easily handles fluid with viscosity up to 35,000 CPS. The pressure gauge and pressure regulator are located on top for easy reading and access. Includes 1/4" OD fluid line connector kit. When dispensing adhesives, a container or bottle should be placed inside the tank chamber. Do not pour curable adhesives directly into the pot to avoid damage or excessive clean up. Non cured liquids can simply be poured in if requred. Main tank body is stainless steel and the lid is aluminium. Tanks with electric level sensor use metal magnet parts and tube inside so are not suitable for reactive adhesives such as Cyanoacrylates. Use standard TS2220 tank for CA adhesives. All products are CE approved, certified industrial grade and are covered by our no-quibble One Year warranty. All products shipped are in sealed boxes or packs that include label with batch codes as well as full user guides.

Specifications: Part ID:TS2220/ TS2220LS Materials: Stainless Steel/ Aluminium Product Colour: Silver Body/ Blue Lid Outer Dimensions: 210mm W x 300mm H Inner Tank Size: 207mm W x 285mm H Weight: 3.0 kg Maximum Pressure: Up to 75 PSI (5 Bar) Meets: CE Approval Warranty: 1 Year Commodity Tariff Code: 90269000 Manufacturer: ADL Lead Time: Ships Within 24 Hours   Suitable for ... General Adhesives & Glues Flowable Liquids Cyanoacrylate Adhesives Threadlocker Adhesives Greases & Lubricants UV Cure Adhesives Solvents & Primers

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.