Hand Plunger Dispensers are designed for the easy
application of pastes, gels, adhesives and fluids. Attach a
syringe barrel and use these dispensers to control fluid
deposits. Hand plungers are low cost solutions and ideal for
low volume applications, repair or re-work or areas where an
air supply is not available..
A portable and lightweight
manual hand syringe applicator for applying most pastes, gels, fluxes,
adhesives and greases. Includes a kit of 10cc industrial grade barrels, wiper
pistons cap seals and tips. When a small spot of grease is required to a motor assembly, or for
repair work, prototypes, etc - the HP dispenser is ideal.
Simple
barrel attachment and comfortable in the hand. Designed for fluid
viscosities ranging from water to lard with barrel sizes suitable for small
dot to medium volumes. Applying pressure to the manual plunger allows you to
control the dispense volume.
Reusable plunger comes with (50)
single clear barrels, (50) pistons, (50) tip caps, (50) end caps and (50)
assorted dispense tips.
All plungers ship
direct from stock and include basic instructions for use.
Part ID:
TS710HP
Materials:
Nylon, Polypropylene, Polyethylene
Colours:
Grey/ Black
Syringe Size:
10cc/ 10ml
Weight:
15 gram (without barrel)
Length:
99.57mm (including push rod)
Height:
43.18mm
Warranty:
12 Months
Commodity Code:
84678900
Plunger Pages
Adhesive Dispensing Ltd provide a wide range of
equipment options for dispensing almost all assembly fluids
- from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and
epoxies.
Hand Plunger Dispensers
Reusable
Syringe Barrel Hand Plunger Dispensers. Supplied
ready to use in sealed packs with labels and batch
codes. Select either plunger rod only or with full
component kit.
End caps seal with the wider flange
top of the barrel against air and liquid leaks.
Ideal for storage or shipping of materials once
barrel is filled. Commodity Code 90289090.
Tip caps seal with the luer lock
outlet end of the barrel against air and liquid
leaks. Ideal for storage or shipping of materials
once barrel is filled. Commodity Code 90289090.
We supply assorted tip kits in boxes
for use with syringe gun dispensers, air powered
dispensers and manual syringes. Colour coded in a
range of different styles, diameters and lengths. Commodity Code 90289090.
Silicone and chloride free materials
Industrial grade parts
Resistant to aggressive fluids and solvents
Low cost solutions
Portable and easy to use
Compatible with industry barrels
Barrel Pages
Standard Barrel and Piston Kits
Industrial grade barrels conveniently
packaged with wiper pistons in the same box. Natural (Clear), Amber
(Tint) or Black (Opaque) barrels made from high density
polypropylene. Standard PE pistons, flat walled, easy flow and
rubber type. Barrel sizes 3cc, 5cc, 10cc, 30cc, 55cc.
Read more...
Syringe Barrels Only
Industrial grade
syringe barrels in Natural (Clear), Amber
(Tint) or Black (Opaque) made from high density
polypropylene. Barrel sizes 3cc, 5cc, 10cc, 30cc, 55cc. Luer lock
design to accept precision tips. Wide falnges for secure attachment
to pneumatic dispensers and syringe guns.
Read more...
Syringe Barrel Wiper Pistons Only
Wiper pistons for use with syringe barrels. Pistons ensure materials
are dispensed from the barrel cleanly, no air pockets and without
mess. White general purpose pistons are used for all liquids and
pastes. Easy flow pistons are less restrictive. Red flat wall
pistons for stringy glues. Black rubber pistons for particle filled
pates. Read more...
Syringe Barrel End Caps and Tip Caps
A
range of syringe barrel snap-on end caps and luer lock tip caps to
provide an airtight seal both ends of filled syringe barrels. End
caps for barrel sizes 3cc to 55cc,. Tip caps for use with all size
syringe barrels and valves. Tip caps available in black, white,
green, blue clear or orange colours and in standard or round styles.
Read more...
Luer Lock Precision Dispensing Tips
Luer lock dispensing tips in gauge sizes from 8 to
34. Precision tube tips, smooth flow tapered, TLC crimped tips,
aluminium hub, angled tube, brush tips and flexible polypro tube.
Conveniently packaged in sealed boxes of 50 or bulk value packs, all
direct from stock. Read more...
Big Barrel and Piston Kits
For larger volume dispenser, we stock big barrels in
sizes 100cc, 200cc, 300cc, 400cc and 500cc. The barrel is made from
high density clear polypropylene with PE wiper pistons. Kit includes
an air cap, gasket and 5ft. airline hose with connector to dispenser.
Read more...
Prices are
in GBP pounds. Vat is charged on all UK orders. We provide VAT
invoices with all transactions. Vat is not charged on any orders placed
with us that ship outside the UK and EU. No VAT is charged for any
orders placed for shipment to the EU only if a valid company VAT number
is provided to us at time of order or prior to shipping. Products
are covered by a 12-month warranty against all faults and malfunction.
All orders placed online are encrypted for total
safety and security. Additional encryption now protects all of the
web pages on this site. Please read our
privacy
agreement for details of how we conform to GDRP. We can also
process any phone or fax payments by credit and debit cards.
Please contact our accounts department if you would like to apply for a
30 day credit account with us.
Disclaimer: While reasonable efforts have been made
to ensure all information on this website is
accurate, Adhesive Dispensing Ltd. do not assume
responsibility for any errors or omissions. All
specifications, illustrations, data and prices are
subject to change without notice.
Copyright 2023 Adhesive
Dispensing Ltd. All rights reserved.
All products are safe for
use for industrial applications. The components are leak-free and
supplied in sealed packaging to prevent contamination.
Silicone Free Products
Products including air
powered barrels, cartridges, nozzles, luer tips, fluid lines, tubing,
caps and seals - are certified silicone free to prevent contamination of
sensitive adhesives dispensed from them.
