Adhesive Dispensing

Home   |  Privacy   |   Terms   |  Accounts  |   Contact Us  |   About Us
  Product Search 

You currently have items in your basket. (Total=)

Home > Equipment > Fume Extraction > A300S
Solvent, Aerosol and Adhesive Fume Filtration System
The A300S is a recirculatory glue booth which comes complete with spray shield. It is designed for art, graphics, hobbies, modelling and crafts, for use in areas where ducted glue booths are not practical.
Systems are supplied with user guide to assist with the initial setting up process. Customers can contact us for full support and advice in using this fume removal station.

The particulate (intake) filter is a three stage graduated fibre filter with a high dust holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.

The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced.

These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants. They are not recommended for continual usage, i.e. production applications, particularly in confined and/or badly ventilated areas.

Demonstrating adequate control of the risks to the health of employees, students and the general public, from mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH).


Recirculatory A3 size filter unit for aerosol adhesives, lacquers, solvents, paints, solders, particles and dust. Units can be used in two positions either reclined (on back stand) or upright on the work bench. Filtration of particles down to 5 micron. Carbon fibre filter assists in the reduction of solvent odours. Portable and easy to use system. Features dual fans with particle and carbon filters.

Steel construction finished in dove grey - plastic replaceable
spray/ fume shield - back stand/ carry handle - particulate filter - carbon impregnated fibre filter - axial fan (s) - external rotor motor type brushes - UL, VDE and CSA approved (A300S has two fans) - sealed electrical wiring and switch, downstream of filters. *110V 60Hz version available if required.

All filtration systems and extraction systems carry a 2 Year warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. These units can be used in two positions.

Reclining position (on back-stand) For Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. A300S up to A3.

Upright position For model sprays and airbrush use light grinding particles solder fume displacement general solvent dilution etc.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

  GBP   each ex. Vat.
Excludes carriage.
Lead Time:
Ships Around 2-3 Weeks
  Summary: Simple system to remove adhesive and solvent fumes and spray from the work area without the need for outside duct hoses or pipes. Shipped with accessories ready to use out of the box. CE approved with full user guide.  
Product Code Qty Price GBP Add
A300S 1   each
  Part ID: A300S
  Fan Motor Spec: 230V 50Hz 105W
  Air Volume at Free Air: 325 m3/hr
  Air Velocity at Filter Face: 0.50 m/sec
  Air Velocity at Hood Face: 0.32 m/sec
  Noise Level: 59 dB (A)
  Dimensions: 385 x 510 x 350mm H/W/D
  Weight: 19 kg
  Meets or Exceeds: CE
  Country of Mfg: UK
  Mfg: WS
  Warranty: 2 Years
  Commodity Code: 90269000
  Adhesive dispensers     Syringe barrels   Dispensing tips  
  Dispensers & Valve Controllers     Consumables
        Techcon Techkit cartridges  
  Cartridges & Plungers     Dispensing Nozzles   Techkit Cartridges  
  Full Catalogue
  Syringe Barrels
  Cartridges & Nozzles
  Dispense Tips
  Nozzles Brochure
  Dispense Guns
  Dual Air Guns
  Dual Cartridge & Mixers

  Cartridges Techkit Cartridges
Cartridge Plungers Nozzles
Cartridge Kits Cartridge Retainers
Cartridge Caps Cartridge Guns
Syringe Barrels Syringe Guns
Syringe Pistons Dispense Tips
Syringe Caps Manual Syringes
Dual 2K Cartridges Static 2K Mixer Nozzles
Air Dispensers Dispensing Equipment
Syringe Racks Special Offers
  Luer Lock Bottles Bench Stands 
Flux Primer Pens Syringe Filling Systems
Threadlocker Adhesives Cyanoacrylate Adhesives
Threadlocker Valves Cyanoacrylate Valves
UV Cure Adhesives Solder Paste Valves
UV Cure Valves Spray Valves
Grease Valves Valve Controllers
XYZ Robots Pressure Pots
Rotary Dispensing Table Contract Fill Repackaging
Fume Extraction Compressors

Copyright 2019 Adhesive Dispensing Ltd. All transactions subject to Adhesive Dispensing Ltd standard Terms & Conditions, E&OE.

Prices are in UK pounds.  Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping.  Products are covered by a 12-month warranty against faults and malfunction.  All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.


Website copyright intelligence monitoring