Adhesive Dispensing

Home   |  Privacy   |   Terms   |  Accounts  |   Contact Us  |   About Us
  Product Search 
 

You currently have items in your basket. (Total=)

> Home > Equipment > Pressure Pots > PT5-OR
 
           
     
 
EPR Rubber O-Ring Seal for 5 Litre Pressure Pot
 
Fluid tanks keep a steady fluid pressure, eliminate fluid contamination and evaporation, and eliminate fumes. This EPR rubber O-Ring seals around the tank lid.
 
TS1258-VIT O-Ring for TS1258 Pressure Pot Techcon
 

This part code is for a replacement EPR rubber O-ring for the TS2250 pressure pot. The standard O-ring supplied with the pressure pot is EOR rubber and is intended for applications with lubricants, conductive and non-conductive adhesives and various other compounds not listed below. This O-ring may be cleaned with Toluene and/ or Isopropyl Alcohol.

WARNING: Do not soak O-ring in Toluene, MEK and Acetone. Read material safety data sheet for any solvent prior to use.

Spare O-ring. A kit is available made from EPR and is intended for applications using fluids containing UV adhesives, Cyanoacrylates (CAs), Methacrylates, and/or Acrylic Acids. If used, this O-ring may be cleaned as necessary with Isopropyl Alcohol, Acetone and MEK.

Please note: Occasionally the EPR O-ring will swell or degrade when in contact with some UV adhesives, Cyanoacrylates (CAs), Methacrylates and/or Acrylic Acids. This might be due to other components in the fluid product. The O-ring is easy to replace, fitted in the slot within the tank lid. 6mm Diameter.  

 
EPR Rubber O-Ring Seal
 
GBP   each ex. Vat.
Excludes carriage.
Product Code: PT5-OR
Lead Time:
24 Hours
 
Summary: EPR Rubber O-Ring replacement for TS2220 pressure pot only. Simple installation into tank lid recess.
 
Product Code Qty Price GBP Add
PT5-OR 1   each
 
TS2250 Pressure Pot
 
GBP   each ex. Vat.
Excludes carriage.
Product Code: TS2250
Lead Time:
24 Hours
 
Summary: Standard tank unit with lid, adjustable air pressure gauge, stainless steel tube fitting, 1/4" OD flexible tube, user guide. CE approved.
 
Product Code Qty Price GBP Add
TS2250 1   each
 
  Part ID: PT5-OR
  Materials: EPR Rubber
  Product Colour: Black
  Tank Outer Diameter: 188 mm
  Tank Chamber Diameter: 180 mm
  Tank Weight: 6 kg
  Tank Height: 255mm
  Tank Maximum Pressure Up to 75 PSI (5 Bar)
  Meets: CE Approval
  Warranty: 1 Year
 
The level sensor assembly is available to order and retrofit to the standard TS2220 pressure pot. Part Code TS22LS. Price GBP   each ex. Vat.

Items are shipped by a courier on a tracked and insured service for all items that are available from stock. Items on a lead time will be shipped as soon as they are available.

Tanks will handle low to medium viscosity liquids up to 35,000 CPS. Includes thin solvents, liquid, fluxes, flowable silicones, Cyanoacrylate, UV cure, inks, paints, lubricants, threadlockers & more.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
 
 

Tank Features

  75 psi High operating pressure
  Fluid Outlet Port On the lid for easy access
  Four knobs to open/close lid For positive and uniform seal
  Pressure Gauge Located on top for easy reading
  Pressure Regulator Located on top for ease of access
  Relief Valve with Pull Ring To depressurise after usage
  Disposable polyethylene Fluid lines can be changed quickly
  Hose Kit Supplied with tank as standard 1/4"
  Tube Sizes 1/4", 3/8" and 4mm fittings options are available
 
      Metering Valves Adhesive Dispensing   Dispensing tips  
  Dispensers & Valve Controllers     Dispensing Valves   Dispensing
Tips
 
 
  Pressure Pot Tanks Adhesive DIspensing       Fluid line feed tubing adhesive dispensing  
  Pressure Pots Tanks     Dispensing Nozzles   Feed Tubing Fluid Lines  
 
Adhesive Dispensing Valve System Pressure Pot
 
  Literature
   
  Full Catalogue
  Syringe Barrels
  Cartridges & Nozzles
  Dispense Tips
  Nozzles Brochure
  Dispense Guns
  Dual Air Guns
  Dual Cartridge & Mixers
 

  
 
     
Cartridges Techkit Cartridges
Cartridge Plungers Nozzles
Cartridge Kits Cartridge Retainers
Cartridge Caps Cartridge Guns
Syringe Barrels Syringe Guns
Syringe Pistons Dispense Tips
Syringe Caps Manual Syringes
Dual 2K Cartridges Static 2K Mixer Nozzles
Air Dispensers Dispensing Equipment
Syringe Racks Special Offers
   
 
     
Luer Lock Bottles Bench Stands
Flux Primer Pens Syringe Filling Systems
Threadlocker Adhesives Cyanoacrylate Adhesives
Threadlocker Valves Cyanoacrylate Valves
UV Cure Adhesives Solder Paste Valves
UV Cure Valves Spray Valves
Grease Valves Valve Controllers
XYZ Robots Pressure Pots
Rotary Dispensing Table Contract Fill Repackaging
Fume Extraction Compressors
   
 
 
 
Techcon
 

Copyright 2019 Adhesive Dispensing Ltd. All transactions subject to Adhesive Dispensing Ltd standard Terms & Conditions, E&OE.

Prices are in UK pounds.  Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping.  Products are covered by a 12-month warranty against faults and malfunction.  All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.

   
 

Website copyright intelligence monitoring