Our Syringe Gun dispensers are designed for the controlled
application of pastes, gels, adhesives and fluids. A cost
effective quality made syringe dispensing gun for use with
standard 10ml size syringe barrels. Ideal for low volume
production, re-work or repair work.
Syringe Guns offer a low cost
dispensing solution for most low to medium viscosity pastes, gels,
silicones, greases, adhesives and many other liquids. A portable and lightweight manual
dispenser for applying most fluids.
A 7:1 ratio leverage for effortless
trigger movement. The rod moves 3mm (1/8 Inch) once pressed to provide
controlled
deposits without drips or ooze.
Push the top button to release and
pull back the plunger rod to remove the barrel. Simple bayonet twist-on/ twist-off syringe barrel
attachment.
Ideal manual gun for deposits or beads of
solder paste, solder flux, RTV, silicones, sealants, gels, greases,
compounds, PVA glues, general adhesives and many other liquids..
Each
Syringe Gun includes components and this version is supplied with: (1) dispensing
barrel reservoir,
(1) wiper piston, (1) storage end cap, (1) locking tip cap, (3) dispensing
tips. All Syringe guns ship direct from stock
and include basic instructions for use.
TS710SG Syringe Gun
GBP each
ex. Vat. Excludes carriage.
Product Code: TS710SG
Lead Time: 24 Hours
Summary: Manual
operated Syringe Gun for use with 10cc size barrels. Bayonet
lock secure attachment. Rod lever release. 7:1 ratio
leverage to provide easy control over pastes & gels.
Basic
gun pnly with (1) syringe barrel, (1) piston, (1) end cap,
(1) tip cap and (1) dispense tips.
Product Code
Qty
Price GBP
Add
TS710SG
1
each
TS710SG Syringe Gun Kit
GBP each
ex. Vat. Excludes carriage.
Product Code: TS710SG-KIT
Lead Time: 24 Hours
Summary: Manual
operated Syringe Gun for use with 10cc size barrels. Bayonet
lock secure attachment. Rod lever release. 7:1 ratio
leverage to provide easy control over pastes & gels. Full
gun kit with (50) syringe barrels, (50) pistons, (50) end caps,
(50) tip caps and (50) assorted tips.
Product Code
Qty
Price GBP
Add
TS710SG-KIT
1
each
Items
are shipped in the UK by a courier on a tracked and
insured service with products that are available from stock. Items on a
longer
lead time will be shipped as soon as they are made available.
Adhesive Dispensing Ltd provide a
wide range of equipment options for dispensing almost all assembly
fluids - from watery liquids, solvents, primers and activators through
to thick pastes, sealants, silicones, gels and epoxies.
Part ID:
TS710SG
Materials:
Nylon, Polypropylene, Polyethylene
Colours:
Red/ White
Syringe Size:
10cc/ 10ml
Gun Weight:
120 grams (without barrel)
Gun Length:
265mm (including push rod)
Gun Height:
135mm
Warranty:
12 Months
The guns are robust and
handle most liquids and pastes dispensed from them. However, it is
important to press the small release button at the top of the gun before
pulling the rod back when changing syringe barrels. O-rings can become
worn or covered in glue so they are available to order from stock as
replacements.
The gun is supplied with (1) spare
rubber O-ring in the pack. For future
replacement, select the10cc size in EPR or Viton. Please contact us
if replacement rods are required.
General Use: Guns are portable and can be
used in a factory production or assembly department as well as for
repair and re-work. Guns are commonly used in the field for repair or
maintenance applications.
Common Applications:- Dots and
beads of solder paste, Dots and beads of solder flux, Grease to
bearings, PVA glue to furniture joints, RTV to seal seams, Silicone dots
to bond products, Gasket sealant repair, Shots of roach insecticides,
General adhesive applications.
Supplied with Barrel, Piston, Caps and Tips
Strong 7:1 Ratio Hand Lever Leverage
Controlled Shot Deposits or Beads
Lightweight yet Robust Construction
Quick Barrel Bayonet Attachment
Low Cost Portable Dispensing Solutions
Ships direct from stock
Copyright
2019 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
Prices are
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
us.
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.
