2.5oz Pneumatic Cartridge Gun Dispenser Applicator |
Cartridge guns are designed for the controlled
application of pastes, gels, adhesives and other assembly fluids.
For use with industry standard industry plastic cartridges
as well as silicone tubes. Industrial grade products for regular
use. These are the 100A range offering high build quality with
adjustable regulators. Compatible with
2.5oz size Semco and Techcon
type cartridges. |
|
 |
A
high quality pneumatic cartridge gun with metal threaded retainer and pistol
grip. 2.5oz size (75cc approx). Suited to controlled lines or potting of
most adhesives, resins, sealants, RTV, grease, gels, long cure or single
part epoxies, mastics and potting compounds.
Connect an air line to
the applicator with a 1/4 Inch NPT threaded fitting to the male thread or
use optional 1000-12 hose. This
gun features a built-in adjustable regulator and a hook ring to accept a
counter balance. Our series of
metal retainers will work with this gun range allowing options to change
the cartridge size.
This gun is supplied with (1) plastic cartridge,
(1) plastic plunger, (1) flange cap seal, (1) tip cap seal, (1) plastic
nozzle, (1) tip plastic adapter and (1) precision tip.
General Use: Guns
are portable and can be used in a factory production or
assembly department as well as for repair and re-work. Guns
are commonly used in the field for repair or maintenance
applications.
Common
Applications: Dots and beads of solder paste, dots and
beads of solder flux, grease to bearings, PVA glue to
furniture joints, RTV to seal seams, silicone dots to bond
products, gasket sealant repair, shots of roach
insecticides, general adhesive applications.
100A series guns have
a
Commodity Tariff Code of 82055980. Plastic components have a
Commodity Tariff Code of 39269097.
Adhesive Dispensing Ltd
provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents,
primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The guns are robust and handle most liquids
and pastes dispensed from them. The handle cap uses a hard
wearing rubber gasket seal for the retainer that can be replaced
after very long periods of use. Gaskets held in stock.
Items are shipped by a courier tracked and insured for all items
that are available from stock. Items on a lead time will be
shipped as soon as they are made available. |
|
Related Dispensing Products |
 |
 |
 |
 |
 |
Cartridges Plungers |
Plastic Nozzles |
Techkit Cartridges |
Syringes Consumables |
Luer Lock Dispensing Tips |
|
2.5 Ounce Cartridge Applicator Guns |
We
stock alternative dispensing options
for use with Semco and Techcon 2.5 Ounce
size cartridges - as listed below.
These guns are all held in stock.
|
|
 |
 |
 |
 |
 |
AD16-25
Manual Gun |
221824
Manual Gun |
250255
Pneumatic Gun |
250250B
Pneumatic Gun |
AD25CCG
Battery Gun |
|
|