10 Litre Pressure Pot with Adjustable Air Regulator
Our
pressure tanks keep
a steady fluid pressure, eliminate fluid contamination and
evaporation, and eliminate fumes. Models are available to suit many
liquids, adhesives and solvents. This stainless steel
version has adjustable air pressure and is supplied complete with fluid lines and
fittings. Use the adjustable regulator on the lid to provide a
constant flow of liquid. This tank is supplied with electric level sensing
fitted.
All products
are CE approved, certified industrial grade and are covered by our no-quibble One Year warranty.
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids -
from watery liquids, solvents, primers and activators through to
thick pastes, sealants, silicones, gels and epoxies.
The TS22100LS Pressure Pot
(pressure up to 75 psi) is designed to accommodate all solvents and
adhesives, as well as cyanoacrylates and UV cure.
It will accommodate clear, black
and stainless steel fittings and feed tubing in 1/4, 3/8 and 6 mm OD, with
stainless steel compression path fitting for a continuous fluid path from
the reservoir inside the pot to the point of use.
Feed tube is pushed through the tank lid fitting to reach the inside bottom
chamber. The fitting is then tightened to ensure a direct liquid flow
without leaks. Airtight seals ensure no leakage
or air entrapment problems. The 75 psi operating pressure version easily handles
fluid with viscosity up to 35,000 CPS.
The pressure gauge and
pressure regulator are located on top for easy reading and access. Includes
1/4" OD fluid line connector kit.
When dispensing adhesives, a
container or bottle should be placed inside the tank chamber. Do not pour
curable adhesives directly into the pot to avoid damage or excessive clean
up. Non cured liquids can simply be poured in if requred. Main tank body is
stainless steel and the lid is aluminium.
Tanks with electric level sensor use metal magnet parts and tubing inside so
are not suitable for reactive adhesives such as Cyanoacrylates. Use smaller
TS2220 or
TS2250 tanks for CA adhesives.
Part ID:
TS22100LS
Materials:
Stainless Steel/ Aluminium
Product Colour:
Silver Body/ Blue Lid
Height:
415.0 mm
Width:
310.0 mm
Inner Tank Height:
395.0 mm
Inner Tank Diameter
305.0 mm
Weight:
7.0 kg
Colour:
Silver Body/ Blue Lid
Maximum Pressure
Up to 75 PSI (5 Bar)
Meets:
CE Approval
Warranty:
1 Year
Lead Time:
72 Hours
Tank lids seal the air using a rubber O-ring gasket. These are available
as replacements direct from stock. Part CodePT5-OR.
Price GBP each ex. Vat.
Items
are shipped by a courier on a tracked and
insured service for all items that are available from stock. Items on a
lead time will be shipped as soon as they are available.
Tanks will handle low to medium viscosity liquids up to 30,000 CPS.
Includes thin solvents, liquid, fluxes, flowable silicones,
oils, UV cure,
inks, paints, lubricants, threadlockers & more.
Adhesive Dispensing Ltd provide a wide
range of equipment options for dispensing almost all assembly fluids - from
watery liquids, solvents, primers and activators through to thick pastes,
sealants, silicones, gels and epoxies.
More Info
Part
Code
Specs
Body
Lead Time
Qty
Price GBP
Add
TS2210LS Pressure Pot
10 Litre 0-75 PSI Regulator
Stainless Steel
72 Hours
1
each
More Info
Part
Code
Specs
Colour
Lead Time
Pack
Price GBP
Add
Feed Tubing in clear
(natural), White and black (opaque) colours.
Natural for most materials and black for UV
cure adhesives. Polyethylene tubes with open ends
for attachment to fittings. Maximum
pressure 100 psi. Use with dispensing
valves, pressure pots, cartridges and
syringe barrels. All prices are per length of (10
ft.).
TSD1099-24 1/8" (3.00mm (ID) 1/4" (6.40mm OD)
Polyethylene Flexible Tube
Natural
24 Hours
10 ft.
pack
TSD1099-11 1/8" (3.00mm (ID) 1/4" (6.40mm OD)
Polyethylene Flexible Tube
White
24 Hours
10 ft.
pack
TSD1099-12 1/8" (3.00mm (ID) 3/16" (4.76mm OD)
Polyethylene Flexible Tube
White
24 Hours
10 ft.
pack
TSD1099-23 1/4" (6.40mm (ID) 3/8" (9.96mm OD)
Polyethylene Flexible Tube
Natural
24 Hours
10 ft.
pack
TSD1099-45 4mm ID Metric 6mm OD Metric
Polyethylene Flexible Tube
Natural
24 Hours
10 ft.
pack
TSD1099-25 1/8" (3.00mm (ID) 1/4" (6.40mm OD)
Polyethylene Flexible Tube
Black
24 Hours
10 ft.
pack
TSD1099-22 1/4" (6.40mm (ID) 3/8" (9.96mm OD)
Polyethylene Flexible Tube
Black
24 Hours
10 ft.
pack
TSD1099-46 4mm ID Metric 6mm OD Metric
Polyethylene Flexible Tube
Black
24 Hours
10 ft.
pack
More Info
Part
Code
Specs
Body
Lead Time
Qty
Price GBP
Add
Fluid Line tubes in clear
(natural) and black (opaque) colours.
Natural for most materials and black for UV
cure adhesives. Polyethylene tubes with luer lock attachment. Maximum
pressure 100 psi. Use with dispensing valves,
pressure pots, cartridges and syringe
barrels. Length options. All prices are for
sealed packs of (10).
Copyright
2018 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
Prices are
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
us.
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.