The TS2250 Pressure Pot (pressure up to 75 psi) is designed to accommodate all solvents and adhesives, as well as cyanoacrylates and UV cure.

It will accommodate clear, black and stainless steel fittings and feed tubing in 1/4, 3/8 and 6 mm OD, with stainless steel compression path fitting for a continuous fluid path from the reservoir inside the pot to the point of use.

Feed tube is pushed through the tank lid fitting to reach the inside bottom chamber. The fitting is then tightened to ensure a direct liquid flow without leaks.

Airtight seals ensure no leakage or air entrapment problems. The 75 psi operating pressure version easily handles fluid with viscosity up to 35,000 CPS.

The pressure gauge and pressure regulator are located on top for easy reading and access. Includes 1/4" OD fluid line connector kit.

When dispensing adhesives, a container or bottle should be placed inside the tank chamber. Do not pour curable adhesives directly into the pot to avoid damage or excessive clean up. Non cured liquids can simply be poured in if requred. Main tank body is stainless steel and the lid is aluminium.

Tanks with electric level sensor use metal magnet parts and tube inside so are not suitable for reactive adhesives such as Cyanoacrylates. Use standard TS2250 tank for CA adhesives.

All products are CE approved, certified industrial grade and are covered by our no-quibble One Year warranty.