|
|
|
|
|
|
|
|
Precision
Needle Dispense Valve |
|
High speed dispensing valve
for making micro dots and beads of adhesives, inks, solvents
and many other fluids. The inner needle shuts off near the
tip end reducing dead space which improves deposit control
and eliminates drips. Use this valve with a standard
pneumatic timed controller. |
|
 |
|
A precision dosing valve that uses a needle assembly to dispense
precise dots or very fine beads of low to medium viscosity
adhesives and fluids such as anaerobics, activators, inks, gels,
solvents, lubricants, chemicals and UV's.
Needle seal at
tip end prevents dead space for very fast shut off when
dispensing micro dots without drips. Suited to repeat deposits,
controlled lines or potting of grease, gels, UV cure, solvents
and inks.
This needle valve is designed to apply micro
shots without drips. The valve design is vertical with fluid
flow from the side either by syringe, cartridge or fluid line
feed (from pressure pot). Always use black fluid lines or feed
tubing with UV cure adhesives.
All valves are shipped
with a luer lock fluid elbow fitting, airline hose with male
quick connect, mounting attachment, tip cap end seal, selection
of dispensing tips and user guide. Valves are supplied with a 1
Year warranty.
Do not use this valve for reactive adhesives and fluids
such as Cyanoacrylates. Use
TS5622VU
diaphragm valve
for CA glues.
Adhesive Dispensing Ltd
provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents,
primers and activators through to thick pastes, sealants,
silicones, gels and epoxies. |
|
|
Specifications:
Wetted Parts: Stainless Steel, Teflon
Body Material:
Stainless Steel
Valve Body Colour: Silver
Size:
118.8mm L x 28.5mm Diameter
Valve Weight: 136 Gram
Fluid Viscosity Range: 1 to 100,000 CPS
Repeatability:
+/- 0.30%
Cycle Rate: Up to 500 cycles/ minute
Flow
Rate: 900ml/Min (water) @ 100 psi
Minimum Shot Size:
0.003cc/ ml
Maximum Fluid Pressure: 300 psi
Activation
Air Pressure: Minimum 70psi
Material Inlet Thread Size:
1/8" NPT
Material Outlet Thread Size: Male Luer Lock
Mounting Hole Thread Size: 1/4-20UNC-2B
Fluid Flow Path:
Straight |
|
|
|
|
Delivery:
Products
shipped by courier on a tracked and
insured service for stock items. Products on a
longer
lead time or built to order will be sent as soon as available. Customers are informed of
ship dates should there be a slight delay.
Typical Applications:- Deposits
of inks, paints, solvents, primers, silicones, UV cure, activators, general
adhesives and liquid applications. |
|
|
|
Air Operated Precision Needle Valve |
|
More Info |
Part Code |
Description |
Stock |
Price GBP |
Add |
 |
|
| Type: Needle Valve |
| Brand: TSI |
| Body: Stainless Steel |
| Tariff Code: 90282000 |
| Origin: USA |
|
in stock |
each |
 |
|
|
 |
|
|
More Info |
Part Code |
Description |
Stock |
Price GBP |
Add |
|
|
|
| Type: Needle Valve |
| Brand: TSI |
| Body: Stainless Steel |
| Tariff Code: 90282000 |
| Origin: USA |
|
in stock |
each |
|
|
|
|
More Info |
Part Code |
Description |
Stock |
Price GBP |
Add |
|
|
|
| Type: Needle Valve |
| Brand: TSI |
| Body: Aluminium |
| Tariff Code: 90282000 |
| Origin: USA |
|
in stock |
each |
|
|
|
|
More Info |
Part Code |
Description |
Stock |
Price GBP |
Add |
 |
|
| Type: Valve Controller |
| Brand: TSI |
| For: Air Operated Valves |
| Tariff Code: 90282000 |
| Origin: USA |
|
in stock |
each |
|
|
|
|
More Info |
Part Code |
Description |
Stock |
Price GBP |
Add |
 |
|
| Type: Valve Controller |
| Brand: TSI |
| For: Air Operated Valves |
| Tariff Code: 90282000 |
| Origin: USA |
|
in stock |
each |
|
|
|
|
More Info |
Part Code |
Description |
Stock |
Price GBP |
Add |
 |
|
| Type: Pressure Pot |
| Brand: ADL |
| Size: 5 Litre |
| Tariff Code: 84678900 |
| Origin: USA |
|
in stock |
each |
|
|
|
|
More Info |
Part Code |
Description |
Stock |
Price GBP |
Add |
 |
|
| Type: Feed Tubing |
| Dia: 1/4" OD, 1/8" ID |
| Colour: Clear |
| Tariff Code: 39269097 |
| Origin: UK |
|
in stock |
per
10 ft. |
|
|
|
|
More Info |
Part Code |
Description |
Stock |
Price GBP |
Add |
 |
|
| Type: Feed Tubing |
| Diameter: 1/4" OD |
| Colour: Black |
| Tariff Code: 39269097 |
| Origin: UK |
|
in stock |
per
10 ft. |
|
|
|
|
|
|
 |
|
|
|
|
|
Air-Powered Dispensers * Industrial Dispensing Components *
Precision Dispense Valve Systems * Bench Robots |
|
Adhesives * Packaged Components * Techkits * RatioPacks *
Hingepacks * Syringe Barrels * Cartridges * Nozzles |
|
Prices are
in GBP pounds. Vat is charged on all UK orders. We provide VAT
invoices with all transactions. Vat is not charged on any orders placed
with us that ship outside the UK and EU. No VAT is charged for any
orders placed for shipment to the EU only if a valid company VAT number
is provided to us at time of order or prior to shipping. Products
are covered by a 12-month warranty against all faults and malfunction.
All orders placed online are encrypted for total
safety and security. Additional encryption now protects all of the
web pages on this site. Please read our
privacy
agreement for details of how we conform to GDRP. We can also
process any phone or fax payments by credit and debit cards.
Please contact our accounts department if you would like to apply for a
30 day credit account with us.
Disclaimer: While reasonable efforts have been made
to ensure all information on this website is
accurate, Adhesive Dispensing Ltd. do not assume
responsibility for any errors or omissions. All
specifications, illustrations, data and prices are
subject to change without notice.
Copyright 2021 Adhesive
Dispensing Ltd. All rights reserved.
|
|
|
|
|
|
|
